Commit 2c9d4295 authored by Kongou Hikari's avatar Kongou Hikari

OpenOCD: Add CMSIS-DAP/GDLink/USB Blaster Setting

parent 548744be
adapter_khz 1000
#interface ftdi
#ftdi_device_desc "Dual RS232-HS"
#ftdi_vid_pid 0x0403 0x6010
#autoexit true
interface cmsis-dap
transport select jtag
#ftdi_layout_init 0x0008 0x001b
#ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
# ftdi_set_signal, but still good to document
#adapter_nsrst_delay 1500
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1e200a6d
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME gd32vf103 0x08000000 0 0 0 $_TARGETNAME
riscv expose_csrs 3040-3071
bindto 0.0.0.0
init
#reset
#if {[ info exists pulse_srst]} {
# ftdi_set_signal nSRST 0
# ftdi_set_signal nSRST z
#}
halt
# We must turn on this because otherwise the IDE version debug cannot download the program into flash
#flash protect 0 0 last off
adapter_khz 1000
#interface ftdi
#ftdi_device_desc "Dual RS232-HS"
#ftdi_vid_pid 0x0403 0x6010
#autoexit true
interface cmsis-dap
transport select jtag
#ftdi_layout_init 0x0008 0x001b
#ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
# ftdi_set_signal, but still good to document
#adapter_nsrst_delay 1500
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1e200a6d
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME gd32vf103 0x08000000 0 0 0 $_TARGETNAME
riscv expose_csrs 3040-3071
bindto 0.0.0.0
init
#reset
#if {[ info exists pulse_srst]} {
# ftdi_set_signal nSRST 0
# ftdi_set_signal nSRST z
#}
halt
# We must turn on this because otherwise the IDE version debug cannot download the program into flash
#flash protect 0 0 last off
adapter_khz 1000
interface usb_blaster
#ftdi_device_desc "Dual RS232-HS"
#ftdi_vid_pid 0x0403 0x6010
#autoexit true
#interface cmsis-dap
#transport select jtag
#ftdi_layout_init 0x0008 0x001b
#ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
#Reset Stretcher logic on FE310 is ~1 second long
#This doesn't apply if you use
# ftdi_set_signal, but still good to document
adapter_nsrst_delay 1500
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1e200a6d
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME gd32vf103 0x08000000 0 0 0 $_TARGETNAME
riscv expose_csrs 3040-3071
init
#reset
#if {[ info exists pulse_srst]} {
# ftdi_set_signal nSRST 0
# ftdi_set_signal nSRST z
#}
halt
# We must turn on this because otherwise the IDE version debug cannot download the program into flash
#flash protect 0 0 last off
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment